Experimental investigation of open core downdraft biomass gasifier for food processing industry

This paper deals with field related experience of a low temperature industrial heat application through biomass gasification. The gasification system is essentially consists of an open top down draft reactor lined with ceramic. The experiment reveals that 6.5 kg of liquefy petroleum gas (LPG) is fully replaced by 38 kg of sized wood on hourly basis. The maximum temperature attained was 367°C in 130 min at 100.7 Nm³ h⁻¹ gas flow rate. This system has resulted a saving of about 19.5 tons of LPG over 3,000 h of operation, implying a saving of about 33 tons of CO₂ emission, thus a promising candidate for clean development mechanism. Fuel economic analysis of gasifier system showed that the saving was about 13,850 US$ for 3,000 h of baking operation.     

Increasing land pressure in East Africa: The changing role of cassava and consequences for sustainability of farming systems

Increasing land pressure during the past three to four decades has transformed farming systems in the mid-altitude zone of East Africa. Traditional millet-, cotton-, sugarcane- and/or banana-based farming systems with an important fallow and/or grazing component have evolved into continuously cultivated cassava or cassava/maize-based systems. Within three to four decades, cassava cultivation increased from 1–11 to 16–55% of cropped fields in our six study sites. Declining soil fertility, and not labour or food shortage, was apparently the primary trigger for this transformation. The land use changes have increased nutrient offtakes and reduced nutrient recycling rates. Cassava and maize now account for 50–90% of nutrient removal. Whereas single-season fallows were the most important source of nutrient recycling on cropped fields in the past, currently cassava litterfall and maize stover contribute roughly 70% of nutrient recycling, with 50–70% of N, P and K recycled in cassava litterfall. This may explain why many farmers reason that cassava ‘rests’ the soil. With increasing land use pressure farmers progressively use cassava as an ‘imitation fallow’ throughout their farm. Farmers increasingly target cassava to poor fertility fields characterized by low pH and available P. High cassava intensities are nonetheless maintained on more fertile fields, probably to guarantee regeneration of soil fertility on all fields. Once cassava is targeted to poor fertility soils, farmers have run out of low-input management options and need to intensify management to maintain system productivity. As cassava is now used by more farmers and on a larger acreage than fallowing in the studied farming systems, cassava cropping could perhaps serve as an excellent entry point to strengthen system sustainability.     

Runoff and sediment losses from 27 upland catchments in Southeast Asia: Impact of rapid land use changes and conservation practices

Rapid changes in upland farming systems in Southeast Asia generated predominantly by increased population pressure and ‘market forces’ have resulted in widespread land degradation that has been well documented at the plot scale. Yet, the links between agricultural activities in the uplands and downstream off-site effects remain largely unknown because of the difficulties in transferring results from plots to a larger scale. Many authors have thus pointed out the need for long-term catchment studies. The objective of this paper is to summarize the results obtained by the Management of Soil Erosion Consortium (MSEC) over the last 5 years from 27 catchments in five countries (Indonesia, Laos, Philippines, Thailand, and Vietnam). The purpose of the study was to assess the impacts of cultivation practices on annual runoff and erosion rates. Initial surveys in each catchment included topography, soils and land use. Monitoring included climatic, hydrologic and erosion (total sediment yield including bed load and suspended sediment load) data, land use and crop yields, and farmers’ income. In addition, new land management options were introduced through consultations with farmers and evaluated in terms of runoff and erosion. These included tree plantations, fruit trees, improved fallow with legumes, maize intercropped with legumes, planted fodder, native grass strips and agro-ecological practices (direct sowing and mulch-based conservation agriculture). Regressions analyses showed that runoff during the rainy season, and normalized runoff flow coefficient based on erosive rainfall during the rainy season (rainfall with intensity exceeding 25 mm h⁻¹) increase with the percentage of the catchment covered by maize. Both variables decrease with increasing soil depth, standard deviation of catchment slope (that reflects terrain roughness), and the percentages of the catchment covered by fallow (regular and improved), tree plantations and planted fodder. The best predictors of sediment yield were the surface percentages of maize, Job's tears, cassava and footpaths. The main conclusions generated from this study were: (i) soil erosion is predominantly influenced by land use rather than environmental characteristics not only at the plot scale but also at the catchment scale; (ii) slash-and-burn shifting cultivation with sufficiently long rotations (1 year of cultivation, 8 years of fallow) is too often unjustly blamed for degradation; (iii) in its place, continuous cropping of maize and cassava promotes high rates of soil erosion at the catchment scale; (iv) conservation technologies are efficient in reducing runoff and total sediment yield at the catchment scale; (v) the adoption of improved soil management technologies by upland farmers is not a function of the degree of intensification of their farming system and/or of their incomes. The results suggest that if expansion of maize and cassava into already degraded upland systems were to occur due to increased demand for biofuels, there is a risk of higher runoff and sediment generation. A failure to adopt appropriate land use management strategies will result in further rapid resource degradation with negative impacts to downstream communities.     

Degradation and mineralization of 2-chloro-, 3-chloro- and 4-chlorobiphenyl by a newly characterized natural bacterial strain isolated from an electrical transformer fluid-contaminated soil

A bacterium classified as Achromobacter xylosoxidans strain IR08 by phenotypic typing coupled with 16S rRNA gene analysis was isolated from a soil contaminated with electrical transformer ?uid for over sixty years using Aroclor 1221 as an enrichment substrate. The substrate utilization profiles revealed that IR08 could grow on all three monochlorobiphenyls (CBs), 2,4'- and 4,4'-dichlorobiphenyl as well as 2-chlorobenzoate (2-CBA), 3-CBA, 4-CBA, and 2,3-dichlorobenzoate. Unusually, growth was poorly sustaine...     

Forest policies and programs affecting vulnerability and adaptation to climate change

Due to large scale afforestation programs and forest conservation legislations, India’s total forest area seems to have stabilized or even increased. In spite of such efforts, forest fragmentation and degradation continues, with forests being subject to increased pressure due to anthropogenic factors. Such fragmentation and degradation is leading to the forest cover to change from very dense to moderately dense and open forest and 253 km² of very dense forest has been converted to moderately dense forest, open forest, scrub and non-forest (during 2005–2007). Similarly, there has been a degradation of 4,120 km² of moderately dense forest to open forest, scrub and non-forest resulting in a net loss of 936 km² of moderately dense forest. Additionally, 4,335 km² of open forest have degraded to scrub and non-forest. Coupled with pressure due to anthropogenic factors, climate change is likely to be an added stress on forests. Forest sector programs and policies are major factors that determine the status of forests and potentially resilience to projected impacts of climate change. An attempt is made to review the forest policies and programs and their implications for the status of forests and for vulnerability of forests to projected climate change. The study concludes that forest conservation and development policies and programs need to be oriented to incorporate climate change impacts, vulnerability and adaptation.     

Implications of climate change on mitigation potential estimates for forest sector in India

Climate change is projected to impact forest ecosystems, including biodiversity and Net Primary Productivity (NPP). National level carbon forest sector mitigation potential estimates are available for India; however impacts of projected climate change are not included in the mitigation potential estimates. Change in NPP (in gC/m²/yr) is taken to represent the impacts of climate change. Long term impacts of climate change (2085) on the NPP of Indian forests are available; however no such regional estimates are available for short and medium terms. The present study based on GCM climatology scenarios projects the short, medium and long term impacts of climate change on forest ecosystems especially on NPP using BIOME4 vegetation model. We estimate that under A2 scenario by the year 2030 the NPP changes by (−5) to 40% across different agro-ecological zones (AEZ). By 2050 it increases by 15% to 59% and by 2070 it increases by 34 to 84%. However, under B2 scenario it increases only by 3 to 25%, 3.5 to 34% and (−2.5) to 38% respectively, in the same time periods. The cumulative mitigation potential is estimated to increase by up to 21% (by nearly 1 GtC) under A2 scenario between the years 2008 and 2108, whereas, under B2 the mitigation potential increases only by 14% (646 MtC). However, cumulative mitigation potential estimates obtained from IBIS—a dynamic global vegetation model suggest much smaller gains, where mitigation potential increases by only 6% and 5% during the period 2008 to 2108.     

Building responsiveness to climate change through community based adaptation in Bangladesh

This article explores the drivers, benefits, and challenges to climate change adaptation in Bangladesh. It specifically investigates the “Community Based Adaptation to Climate Change through Coastal Afforestation Program,” a 5-year $5 million adaptation scheme being funded and implemented in part by the Government of Bangladesh, United Nations Development Program, and Global Environment Facility. The article explores how the CBACC-CA builds various types of adaptive capacity in Bangladesh and the extent its design and implementation offers lessons for other adaptation programs around the world. The first part of the study begins by describing its research methods consisting of research interviews, site visits, and a literature review. It then summarizes six primary sectors vulnerable to climate change in Bangladesh: water resources and coastal zones, infrastructure and human settlements, agriculture and food security, forestry and biodiversity, fisheries, and human health. The article next describes the genesis and background behind the CBACC-CA, with an emphasis on components that promote capacity development, demonstration projects, risk reduction, and knowledge management. The article concludes that technology by itself is only a partial component of successful adaptation efforts, and that multiple and integrated adaptation measures that cut across sectors and social, institutional, and infrastructural dimensions are needed to truly build resilience and effectiveness.     

Metal microchannel lamination using surface mount adhesives for low-temperature heat exchangers

This paper reports the feasibility of using surface mount adhesives to produce low temperature microchannel arrays in a wide variety of metals. Sheet metal embossing and chemical etching processes have been used to produce sealing bosses that eliminate channel laminae, resulting in approximately 50% material savings over traditional methods. An assembly process using adhesive dispense and cure is outlined to produce leak-free devices. Optimal fill ratios were determined to be between 1.1 and 1.25. Bond strength investigation reveals robustness to surface conditions and a bond strength of 5.5–8.5 MPa using a 3X safety factor. Dimensional characterization reveals a two sigma (95%) post-bonded channel height tolerance under 10% after bonding. Patterning tolerance and surface roughness of the laminae faying surfaces were found to have a significant influence on the final post-bonded channel height. Leakage and burst pressure testing on several samples has established confidence that adhesive bonding can produce leak-free joints. Operating pressures up to 413 kPa have been satisfied, equating to tensile pressure on bond joints of 1.9 MPa. Higher operating pressures can be accommodated by increasing the bond area of devices.     

The impact of agroforestry combined with water harvesting on soil carbon and nitrogen stocks in central Chile evaluated using the ICBM/N model

Soil organic carbon (SOC) and total nitrogen (N) stocks in an agroforestry system with water harvesting were analysed in a field experiment and the results compared with those of other crop management systems in the Mediterranean zone of central Chile. Agroforestry with water harvesting showed higher positive effects on N stocks, mainly in the upper soil layer, than the other crop management systems. However, soil analysis revealed a lack of differences between treatments, a fact that might be related mainly to the short study time (12 years) and the high spatial variability in these soil properties at the experimental site. In addition, the Introductory Carbon Balance Model that simulates N processes (ICBM/N) was evaluated for simulating trends in SOC and N stocks in the field experiment. Soil data collected between 1996 and 2008 in the field experiment and primarily literature data sets were used to test ICBM/N and its performance was evaluated by considering uncertainty in model inputs using Generalised Likelihood Uncertainty Estimation (GLUE) methodology. The GLUE estimates (5% and 95%) and measured SOC and N stocks were in satisfactory agreement. The observed SOC and N stocks were bracketed by the uncertainty bands in 70% and 80% of the simulations, respectively. Sensitivity analysis showed the model to be most sensitive to C parameters, such as the humification coefficient (h). The results of this study show that ICBM/N can be an effective tool for estimating SOC and N stocks from agroforestry combined with water harvesting systems in the Mediterranean zone of central Chile over the medium term. However, they also indicate that additional data sets are needed to redefine the parameter distributions in the model and thus to predict trends in SOC and N stocks in the future.     

Ash deposition impact on the energy performance of photovoltaic generators

A little known side effect of the atmospheric air pollution is the degradation of photovoltaic (PV) cells’ performance due to the deposition of solid particles varying in composition, size and origin. In this context, an experimental-based investigation is conducted in order to compare the energy performance of two identical pairs of PV-panels; the first being clean and the second being artificially polluted with ash, i.e. a by-product of incomplete hydrocarbons’ combustion mainly originating from thermal power stations and vehicular exhausts. A series of systematic measurements of current intensity, voltage output and solar radiation are executed simultaneously for the clean and the polluted PV-panel, so that the effect of several mass depositions on the PVs’ power output, energy yield and conversion efficiency may be determined. According to the results, a considerable deterioration of the PV-panels’ performance is obtained, i.e. almost 30% energy reduction per hour or 1.5% efficiency decrease (in absolute terms) for ash accumulation on the panels’ surface reaching up to 0.4 mg/cm².